Quick and easy fitting

Download

Step 1
Determine the proper length. Cut the BOAGAZ® tubing through the plastic cover and stainless steel to length with the BOAGAZ® tubing cutter. The cut must be centred between two corrugations. Swivel the cutter in one direction and tighten roller pressure slowly after each rotation.
Attention: Overtightening may cause irregular cuts and deformations.

Step 2
Remove the polyethylene cover with the BOAGAZ® stripper knife so that 4 corrugations are exposed to allow assembly of the fittings.
Caution: The stripper knife has a sharp blade, please handle with care.

Step 3
Slide nut over tubing and position the 2 retainer rings. Leave one corrugation exposed at the end of the tubing.

Step 4
Slide nut over retainer ring and hand-tighten nut using wrenches until it contacts the body.
Attention: Respect the maximum tightening torques.